The purpose of the pressure test to becarried out before leaving the factory is to examine the performance and safetyof the high pressure reaction kettle:
Magnetic reaction kettle gas pressure testis done for dry cleaning air, nitrogen or other inert gases. In the course ofthe experiment, there should be safety measures, the experimental unit of thesafety management department should be in the field of supervision andregulation.
Magnetic reaction kettle to do the pressuretest（www.gfanyingfu.com） process is as follows:
In the experiment, the pressure of the ruletest should be boosted to 10%, and the joint part of the welded joint boxshould be checked after 5 minutes.
In the confirmation part without leakageafter continuous experimental pressure boost to rule 50%.
There is no abnormal phenomenon in thecourse of the above process, which will step by step up to 10% step by stepaccording to the experimental pressure of the rule, and keep the pressure for10 minutes. Finally, the design pressure of the high pressure reactor, thepressure to meet the moment to view, check the pressure should adhere to thesame period, if there is a change in the high-pressure reaction tank to confirmthe leak site, should be checked and resolved.
标签:   名人彩票 钣金 加工 冷凝器 激光切割加工